CentOS 7 Source LAMP install
OS : CentOS Linux release 7.4.1708
APACHE : 2.4.37
Mariadb : 10.3.8
PHP : 7.2.12
Apache 2.4.37 설치
설치된 apache 패키지를 제거 합니다.
[root@CentOS7 ~]# yum remove -y httpd httpd-*
Source 설치에 필요한 패키지를 설치 합니다.
[root@CentOS7 ~]# yum install -y make gcc g++ gcc-c++ autoconf automake libtool pkgconfig \
findutils oepnssl openssl-devel openldap-devel pcre-devel libxml2-devel lua-devel \
curl curl-devel libcurl-devel expat-devel flex
패키지를 다운로드 합니다.
(http://mirror.apache-kr.org/httpd/ , http://mirror.apache-kr.org/apr/ , https://sourceforge.net/projects/pcre/files/pcre/)
[root@CentOS7 ~]# wget http://mirror.apache-kr.org/httpd/httpd-2.4.37.tar.gz
[root@CentOS7 ~]# wget http://mirror.apache-kr.org/apr/apr-1.6.5.tar.gz
[root@CentOS7 ~]# wget http://mirror.apache-kr.org/apr/apr-util-1.6.1.tar.gz
[root@CentOS7 ~]# wget http://downloads.sourceforge.net/project/pcre/pcre/8.42/pcre-8.42.tar.gz
Apache Source 설치
apr-1.6.5 설치
[root@CentOS7 apm]# tar xvf apr-1.6.5.tar.gz
[root@CentOS7 apm]# cd apr-1.6.5/
[root@CentOS7 apr-1.6.5]# ./configure --prefix=/usr/local/apr
[root@CentOS7 apr-1.6.5]# make && make install
apr-util-1.6.1 설치
[root@CentOS7 apm]# tar xvf apr-util-1.6.1.tar.gz
[root@CentOS7 apm]# cd apr-util-1.6.1/
[root@CentOS7 apr-util-1.6.1]# ./configure --with-apr=/usr/local/apr/
[root@CentOS7 apr-util-1.6.1]# make && make install
pcre-8.42 설치
[root@CentOS7 apm]# tar xvf pcre-8.42.tar.gz
[root@CentOS7 pcre-8.42]# ./configure --prefix=/usr/local/pcre
[root@CentOS7 pcre-8.42]# make && make install
httpd-2.4.37 설치
[root@CentOS7 apm]# tar xvf httpd-2.4.37.tar.gz
[root@CentOS7 apm]# cd httpd-2.4.37/
[root@CentOS7 httpd-2.4.37]# ./configure --enable-module=so --enable-mods-shared=most --enable-maintainer-mode \
--enable-deflate --enable-headers --enable-rewrite --enable-ssl --enable-proxy --enable-proxy-http \
--enable-proxy-ajp --enable-proxy-balance --with-mpm=worker --with-apr=/usr/local/apr \
--with-pcre=/usr/local/pcre --prefix=/usr/local/apache2
[root@CentOS7 httpd-2.4.37]# make && make isntall
Apache 유저/구릅 생성 및 권한 추가
[root@CentOS7 ~]# groupadd apache
[root@CentOS7 ~]# useradd -g apache -d /usr/local/apache2 -s /sbin/nologin apache
[root@CentOS7 ~]# chown -R apache:apache /usr/local/apache2/
Apache 실행 Test
[root@CentOS7 ~]# vi /usr/local/apache2/conf/httpd.conf
ServerName www.example.com:80
[root@CentOS7 ~]# /usr/local/apache2/bin/apachectl start
[root@CentOS7 ~]# netstat -antp
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 1/systemd
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 1082/sshd
tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 1305/master
tcp 0 64 192.168.0.25:22 192.168.0.1:9938 ESTABLISHED 1417/sshd: root@pts
tcp6 0 0 :::111 :::* LISTEN 1/systemd
tcp6 0 0 :::80 :::* LISTEN 54092/httpd
tcp6 0 0 :::22 :::* LISTEN 1082/sshd
tcp6 0 0 ::1:25 :::* LISTEN 1305/master
[root@CentOS7 ~]#
Systemd Service 파일 생성
[root@CentOS7 ~]# vi /etc/systemd/system/httpd.service
[Unit]
Description=The Apache HTTP Server
[Service]
Type=forking
#EnvironmentFile=/usr/local/apache2/bin/envvars
PIDFile=/usr/local/apache2/logs/httpd.pid
ExecStart=/usr/local/apache2/bin/apachectl start
ExecReload=/usr/local/apache2/bin/apachectl graceful
ExecStop=/usr/local/apache2/bin/apachectl stop
KillSignal=SIGCONT
PrivateTmp=true
[Install]
WantedBy=multi-user.target
[root@CentOS7 ~]# systemctl daemon-reload
[root@CentOS7 ~]# systemctl enable httpd
방화벽 추가
[root@CentOS7 ~]# firewall-cmd --permanent --add-port=80/tcp
[root@CentOS7 ~]# firewall-cmd --permanent --add-port=443/tcp
[root@CentOS7 ~]# firewall-cmd --reload
Mariadb 설치
mysql 유저생성
[root@CentOS7 ~]# useradd mysql
Cmake 3.12 설치
[root@CentOS7 ~]# cd /usr/local/src/
[root@CentOS7 src]# wget https://cmake.org/files/v3.12/cmake-3.12.0.tar.gz
[root@CentOS7 src]# tar xvf cmake-3.12.0.tar.gz
[root@CentOS7 src]# cd cmake-3.12.0/
[root@CentOS7 cmake-3.12.0]# ./configure
[root@CentOS7 cmake-3.12.0]# gmake && make install
[root@CentOS7 cmake-3.12.0]# rm -f CMakeCache.txt
ncruse 6.1 설치
[root@CentOS7 ~]# cd /usr/local/src/
[root@CentOS7 ~]# wget http://ftp.gnu.org/gnu/ncurses/ncurses-6.1.tar.gz
[root@CentOS7 src]# tar xvf ncurses-6.1.tar.gz
[root@CentOS7 src]# cd ncurses-6.1/
[root@CentOS7 ncurses-6.1]# ./configure --with-shared
[root@CentOS7 ncurses-6.1]# make && make install
Mariadb 10.3.8 설치
[root@CentOS7 ~]# cd /usr/local/src
[root@CentOS7 src]# wget --trust-server-names https://downloads.mariadb.org/f/mariadb-10.3.8/source/mariadb-10.3.8.tar.gz/from/http%3A//ftp.kaist.ac.kr/mariadb/?serve
[root@CentOS7 src]# tar xvf mariadb-10.3.8.tar.gz
[root@CentOS7 src]# cd mariadb-10.3.8/
[root@CentOS7 mariadb-10.3.8]# BUILD/autorun.sh
[root@CentOS7 mariadb-10.3.8]# export OPENSSL_ROOT_DIR=/usr/local/ssl
[root@CentOS7 mariadb-10.3.8]# export OPENSSL_INCLUDE_DIR=/usr/local/ssl/include
[root@CentOS7 mariadb-10.3.8]# export OPENSSL_LIBRARIES=/usr/local/ssl/lib
[root@CentOS7 mariadb-10.3.8]# export OPENSSL_ROOT_DIR=/usr/local/ssl
[root@CentOS7 mariadb-10.3.8]# cmake \
-DPLUGIN_TOKUDB=NO \
-OPENSSL_ROOT_DIR=/usr/local/ssl \
-OPENSSL_INCLUDE_DIR=/usr/local/ssl/include \
-OPENSSL_LIBRARIES=/usr/local/ssl/lib \
-DDEFAULT_CHARSET=utf8 \
-DDEFAULT_COLLATION=utf8_general_ci
[root@CentOS7 mariadb-10.3.8]# make install
[root@CentOS7 mariadb-10.3.8]# chown mysql:mysql -R /usr/local/mysql/
참고!!! cmake 를 다시 해야 하는경우
[root@CentOS7 mariadb-10.3.8]# rm -f CMakeCache.txt
mysql_install_db (DB 파일 생성)
[root@CentOS7 mariadb-10.3.8]# su - mysql
[mysql@CentOS7 ~]$ cd /usr/local/mysql
[mysql@CentOS7 mysql]$ scripts/mysql_install_db --user=mysql --basedir=/usr/local/mysql --datadir=/usr/local/mysql/data
[mysql@CentOS7 mysql]$ exit
[root@CentOS7 ~]# usermod -s /sbin/nologin mysql
Systemd 스크립트 작성
[root@CentOS7 ~]# vi /usr/lib/systemd/system/mariadb.service
# It's not recommended to modify this file in-place, because it will be
# overwritten during package upgrades. If you want to customize, the
# best way is to create a file "/etc/systemd/system/mariadb.service",
# containing
# .include /lib/systemd/system/mariadb.service
# ...make your changes here...
# or create a file "/etc/systemd/system/mariadb.service.d/foo.conf",
# which doesn't need to include ".include" call and which will be parsed
# after the file mariadb.service itself is parsed.
#
# For more info about custom unit files, see systemd.unit(5) or
# http://fedoraproject.org/wiki/Systemd#How_do_I_customize_a_unit_file.2F_add_a_custom_unit_file.3F
# For example, if you want to increase mariadb's open-files-limit to 10000,
# you need to increase systemd's LimitNOFILE setting, so create a file named
# "/etc/systemd/system/mariadb.service.d/limits.conf" containing:
# [Service]
# LimitNOFILE=10000
# Note: /usr/lib/... is recommended in the .include line though /lib/...
# still works.
# Don't forget to reload systemd daemon after you change unit configuration:
# root> systemctl --system daemon-reload
[Unit]
Description=MariaDB database server
After=syslog.target
After=network.target
[Service]
Type=simple
User=mysql
Group=mysql
ExecStartPre=/usr/libexec/mariadb-prepare-db-dir %n
# Note: we set --basedir to prevent probes that might trigger SELinux alarms,
# per bug #547485
ExecStart=/usr/local/mysql/bin/mysqld_safe --basedir=/usr
ExecStartPost=/usr/libexec/mariadb-wait-ready $MAINPID
# Give a reasonable amount of time for the server to start up/shut down
TimeoutSec=300
# Place temp files in a secure directory, not /tmp
PrivateTmp=true
[Install]
WantedBy=multi-user.target
mariadb-wait-ready
[root@CentOS7 ~]# vi /usr/libexec/mariadb-wait-ready
#!/bin/sh
# This script waits for mysqld to be ready to accept connections
# (which can be many seconds or even minutes after launch, if there's
# a lot of crash-recovery work to do).
# Running this as ExecStartPost is useful so that services declared as
# "After mysqld" won't be started until the database is really ready.
# Service file passes us the daemon's PID (actually, mysqld_safe's PID)
daemon_pid="$1"
# extract value of a MySQL option from config files
# Usage: get_mysql_option SECTION VARNAME DEFAULT
# result is returned in $result
# We use my_print_defaults which prints all options from multiple files,
# with the more specific ones later; hence take the last match.
get_mysql_option(){
result=`/usr/local/mysql/bin/my_print_defaults "$1" | sed -n "s/^--$2=//p" | tail -n 1`
if [ -z "$result" ]; then
# not found, use default
result="$3"
fi
}
# Defaults here had better match what mysqld_safe will default to
get_mysql_option mysqld datadir "/usr/local/mysql/data"
datadir="$result"
get_mysql_option mysqld socket "/usr/local/mysql/data/mysql.sock"
socketfile="$result"
# Wait for the server to come up or for the mysqld process to disappear
ret=0
while /bin/true; do
if ! [ -d "/proc/$daemon_pid" ] ; then
ret=1
break
fi
RESPONSE=`/usr/local/mysql/bin/mysqladmin --no-defaults --socket="$socketfile" --user=UNKNOWN_MYSQL_USER ping 2>&1`
mret=$?
if [ $mret -eq 0 ]; then
break
fi
# exit codes 1, 11 (EXIT_CANNOT_CONNECT_TO_SERVICE) are expected,
# anything else suggests a configuration error
if [ $mret -ne 1 -a $mret -ne 11 ]; then
ret=1
break
fi
# "Access denied" also means the server is alive
echo "$RESPONSE" | grep -q "Access denied for user" && break
sleep 1
done
exit $ret
mariadb-prepare-db-dir
[root@CentOS7 ~]# vi /usr/libexec/mariadb-prepare-db-dir
#!/bin/sh
# This script creates the mysql data directory during first service start.
# In subsequent starts, it does nothing much.
# extract value of a MySQL option from config files
# Usage: get_mysql_option SECTION VARNAME DEFAULT
# result is returned in $result
# We use my_print_defaults which prints all options from multiple files,
# with the more specific ones later; hence take the last match.
get_mysql_option(){
result=`/usr/local/mysql/bin/my_print_defaults "$1" | sed -n "s/^--$2=//p" | tail -n 1`
if [ -z "$result" ]; then
# not found, use default
result="$3"
fi
}
# Defaults here had better match what mysqld_safe will default to
get_mysql_option mysqld datadir "/usr/local/mysql/data"
datadir="$result"
get_mysql_option mysqld_safe log-error "/usr/local/mysql/data/mariadb.log"
errlogfile="$result"
get_mysql_option mysqld socket "$datadir/mysql.sock"
socketfile="$result"
# Absorb configuration settings from the specified systemd service file,
# or the default "mysqld" service if not specified
SERVICE_NAME="$1"
if [ x"$SERVICE_NAME" = x ]
then
SERVICE_NAME=mysqld.service
fi
myuser=`systemctl show -p User "${SERVICE_NAME}" |
sed 's/^User=//'`
if [ x"$myuser" = x ]
then
myuser=mysql
fi
mygroup=`systemctl show -p Group "${SERVICE_NAME}" |
sed 's/^Group=//'`
if [ x"$mygroup" = x ]
then
mygroup=mysql
fi
# Set up the errlogfile with appropriate permissions
touch "$errlogfile"
chown "$myuser:$mygroup" "$errlogfile"
chmod 0640 "$errlogfile"
[ -x /sbin/restorecon ] && /sbin/restorecon "$errlogfile"
# We check if there is already a process using the socket file,
# since otherwise this systemd service file could report false
# positive result when starting and mysqld_safe could remove
# a socket file, which actually uses a different daemon.
if fuser "$socketfile" &>/dev/null ; then
echo "Socket file $socketfile exists." >&2
echo "Is another MySQL daemon already running with the same unix socket?" >&2
exit 1
fi
# Make the data directory
if [ ! -d "$datadir/mysql" ] ; then
# First, make sure $datadir is there with correct permissions
# (note: if it's not, and we're not root, this'll fail ...)
if [ ! -e "$datadir" -a ! -h "$datadir" ]
then
mkdir -p "$datadir" || exit 1
fi
chown "$myuser:$mygroup" "$datadir"
chmod 0755 "$datadir"
[ -x /sbin/restorecon ] && /sbin/restorecon "$datadir"
# Now create the database
echo "Initializing MySQL database"
/usr/local/mysql/scripts/mysql_install_db --datadir="$datadir" --user="$myuser"
ret=$?
if [ $ret -ne 0 ] ; then
echo "Initialization of MySQL database failed." >&2
echo "Perhaps /etc/my.cnf is misconfigured." >&2
# Clean up any partially-created database files
if [ ! -e "$datadir/mysql/user.frm" ] ; then
rm -rf "$datadir"/*
fi
exit $ret
fi
# In case we're running as root, make sure files are owned properly
chown -R "$myuser:$mygroup" "$datadir"
fi
exit 0
mysql_install_db
[root@CentOS7 ~]# vi /usr/libexec/mysql_install_db
#!/bin/sh
# Copyright (c) 2000, 2013, Oracle and/or its affiliates.
# Copyright (c) 2009, 2013, Monty Program Ab
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; version 2 of the License.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
# This scripts creates the MariaDB Server system tables
#
# All unrecognized arguments to this script are passed to mysqld.
basedir="/usr/local/mysql"
builddir=""
ldata="/usr/local/mysql/data"
langdir=""
srcdir=""
args=""
defaults=""
mysqld_opt=""
user=""
force=0
in_rpm=0
ip_only=0
cross_bootstrap=0
usage()
{
cat <<EOF
Usage: $0 [OPTIONS]
--basedir=path The path to the MariaDB installation directory.
--builddir=path If using --srcdir with out-of-directory builds, you
will need to set this to the location of the build
directory where built files reside.
--cross-bootstrap For internal use. Used when building the MariaDB system
tables on a different host than the target.
--datadir=path The path to the MariaDB data directory.
--defaults-extra-file=name
Read this file after the global files are read.
--defaults-file=name Only read default options from the given file name.
--force Causes mysql_install_db to run even if DNS does not
work. In that case, grant table entries that
normally use hostnames will use IP addresses.
--help Display this help and exit.
--ldata=path The path to the MariaDB data directory. Same as
--datadir.
--no-defaults Don't read default options from any option file.
--defaults-file=path Read only this configuration file.
--rpm For internal use. This option is used by RPM files
during the MariaDB installation process.
--skip-name-resolve Use IP addresses rather than hostnames when creating
grant table entries. This option can be useful if
your DNS does not work.
--srcdir=path The path to the MariaDB source directory. This option
uses the compiled binaries and support files within the
source tree, useful for if you don't want to install
MariaDB yet and just want to create the system tables.
--user=user_name The login username to use for running mysqld. Files
and directories created by mysqld will be owned by this
user. You must be root to use this option. By default
mysqld runs using your current login name and files and
directories that it creates will be owned by you.
All other options are passed to the mysqld program
EOF
exit 1
}
s_echo()
{
if test "$in_rpm" -eq 0 -a "$cross_bootstrap" -eq 0
then
echo "$1"
fi
}
link_to_help()
{
echo
echo "The latest information about mysql_install_db is available at"
echo "https://mariadb.com/kb/en/installing-system-tables-mysql_install_db"
}
parse_arg()
{
echo "$1" | sed -e 's/^[^=]*=//'
}
parse_arguments()
{
# We only need to pass arguments through to the server if we don't
# handle them here. So, we collect unrecognized options (passed on
# the command line) into the args variable.
pick_args=
if test "$1" = PICK-ARGS-FROM-ARGV
then
pick_args=1
shift
fi
for arg
do
case "$arg" in
--force) force=1 ;;
--basedir=*) basedir=`parse_arg "$arg"` ;;
--builddir=*) builddir=`parse_arg "$arg"` ;;
--srcdir=*) srcdir=`parse_arg "$arg"` ;;
--ldata=*|--datadir=*|--data=*) ldata=`parse_arg "$arg"` ;;
--user=*)
# Note that the user will be passed to mysqld so that it runs
# as 'user' (crucial e.g. if log-bin=/some_other_path/
# where a chown of datadir won't help)
user=`parse_arg "$arg"` ;;
--skip-name-resolve) ip_only=1 ;;
--verbose) verbose=1 ;; # Obsolete
--rpm) in_rpm=1 ;;
--help) usage ;;
--no-defaults|--defaults-file=*|--defaults-extra-file=*)
defaults="$arg" ;;
--cross-bootstrap|--windows)
# Used when building the MariaDB system tables on a different host than
# the target. The platform-independent files that are created in
# --datadir on the host can be copied to the target system.
#
# The most common use for this feature is in the Windows installer
# which will take the files from datadir and include them as part of
# the install package. See top-level 'dist-hook' make target.
#
# --windows is a deprecated alias
cross_bootstrap=1 ;;
*)
if test -n "$pick_args"
then
# This sed command makes sure that any special chars are quoted,
# so the arg gets passed exactly to the server.
# XXX: This is broken; true fix requires using eval and proper
# quoting of every single arg ($basedir, $ldata, etc.)
#args="$args "`echo "$arg" | sed -e 's,\([^a-zA-Z0-9_.-]\),\\\\\1,g'`
args="$args $arg"
fi
;;
esac
done
}
# Try to find a specific file within --basedir which can either be a binary
# release or installed source directory and return the path.
find_in_basedir()
{
case "$1" in
--dir)
return_dir=1; shift
;;
esac
file=$1; shift
for dir in "$@"
do
if test -f "$basedir/$dir/$file"
then
if test -n "$return_dir"
then
echo "$basedir/$dir"
else
echo "$basedir/$dir/$file"
fi
break
fi
done
}
cannot_find_file()
{
echo
echo "FATAL ERROR: Could not find $1"
shift
if test $# -ne 0
then
echo
echo "The following directories were searched:"
echo
for dir in "$@"
do
echo " $dir"
done
fi
echo
echo "If you compiled from source, you need to run 'make install' to"
echo "copy the software into the correct location ready for operation."
echo
echo "If you are using a binary release, you must either be at the top"
echo "level of the extracted archive, or pass the --basedir option"
echo "pointing to that location."
link_to_help
}
# Ok, let's go. We first need to parse arguments which are required by
# my_print_defaults so that we can execute it first, then later re-parse
# the command line to add any extra bits that we need.
parse_arguments PICK-ARGS-FROM-ARGV "$@"
#
# We can now find my_print_defaults. This script supports:
#
# --srcdir=path pointing to compiled source tree
# --basedir=path pointing to installed binary location
#
# or default to compiled-in locations.
#
if test -n "$srcdir" && test -n "$basedir"
then
echo "ERROR: Specify either --basedir or --srcdir, not both."
link_to_help
exit 1
fi
if test -n "$srcdir"
then
if test -z "$builddir"
then
builddir="$srcdir"
fi
print_defaults="$builddir/extra/my_print_defaults"
elif test -n "$basedir"
then
print_defaults=`find_in_basedir my_print_defaults bin extra`
if test -z "$print_defaults"
then
cannot_find_file my_print_defaults $basedir/bin $basedir/extra
exit 1
fi
else
print_defaults="/usr/local/mysql/bin/my_print_defaults"
fi
if test ! -x "$print_defaults"
then
cannot_find_file "$print_defaults"
exit 1
fi
# Now we can get arguments from the groups [mysqld] and [mysql_install_db]
# in the my.cfg file, then re-run to merge with command line arguments.
parse_arguments `"$print_defaults" $defaults --mysqld mysql_install_db`
parse_arguments PICK-ARGS-FROM-ARGV "$@"
# Configure paths to support files
if test -n "$srcdir"
then
basedir="$builddir"
bindir="$basedir/client"
extra_bindir="$basedir/extra"
mysqld="$basedir/sql/mysqld"
langdir="$basedir/sql/share/english"
pkgdatadir="$srcdir/scripts"
scriptdir="$srcdir/scripts"
elif test -n "$basedir"
then
bindir="$basedir/bin"
extra_bindir="$bindir"
mysqld=`find_in_basedir mysqld libexec sbin bin`
if test -z "$mysqld"
then
cannot_find_file mysqld $basedir/libexec $basedir/sbin $basedir/bin
exit 1
fi
langdir=`find_in_basedir --dir errmsg.sys share/english share/mysql/english`
if test -z "$langdir"
then
cannot_find_file errmsg.sys $basedir/share/english $basedir/share/mysql/english
exit 1
fi
pkgdatadir=`find_in_basedir --dir fill_help_tables.sql share share/mysql`
if test -z "$pkgdatadir"
then
cannot_find_file fill_help_tables.sql $basedir/share $basedir/share/mysql
exit 1
fi
scriptdir="$basedir/scripts"
else
basedir="/usr"
bindir="/usr/bin"
extra_bindir="$bindir"
mysqld="/usr/libexec/mysqld"
pkgdatadir="/usr/share/mysql"
scriptdir="/usr/bin"
fi
# Set up paths to SQL scripts required for bootstrap
fill_help_tables="$pkgdatadir/fill_help_tables.sql"
create_system_tables="$pkgdatadir/mysql_system_tables.sql"
create_system_tables2="$pkgdatadir/mysql_performance_tables.sql"
fill_system_tables="$pkgdatadir/mysql_system_tables_data.sql"
for f in "$fill_help_tables" "$create_system_tables" "$create_system_tables2" "$fill_system_tables"
do
if test ! -f "$f"
then
cannot_find_file "$f"
exit 1
fi
done
if test ! -x "$mysqld"
then
cannot_find_file "$mysqld"
exit 1
fi
if test -n "$langdir"
then
if test ! -f "$langdir/errmsg.sys"
then
cannot_find_file "$langdir/errmsg.sys"
exit 1
fi
mysqld_opt="--lc-messages-dir=$langdir/.."
else
mysqld_opt="--lc-messages=en_US"
fi
# Try to determine the hostname
hostname=`hostname`
# Check if hostname is valid
if test "$cross_bootstrap" -eq 0 -a "$in_rpm" -eq 0 -a "$force" -eq 0
then
resolved=`"$extra_bindir/resolveip" $hostname 2>&1`
if test $? -ne 0
then
resolved=`"$extra_bindir/resolveip" localhost 2>&1`
if test $? -ne 0
then
echo "Neither host '$hostname' nor 'localhost' could be looked up with"
echo "'$extra_bindir/resolveip'"
echo "Please configure the 'hostname' command to return a correct"
echo "hostname."
echo "If you want to solve this at a later stage, restart this script"
echo "with the --force option"
link_to_help
exit 1
fi
echo "WARNING: The host '$hostname' could not be looked up with resolveip."
echo "This probably means that your libc libraries are not 100 % compatible"
echo "with this binary MariaDB version. The MariaDB daemon, mysqld, should work"
echo "normally with the exception that host name resolving will not work."
echo "This means that you should use IP addresses instead of hostnames"
echo "when specifying MariaDB privileges !"
fi
fi
if test "$ip_only" -eq 1
then
hostname=`echo "$resolved" | awk '/ /{print $6}'`
fi
# Create database directories
for dir in "$ldata" "$ldata/mysql" "$ldata/test"
do
if test ! -d "$dir"
then
if ! `mkdir -p "$dir"`
then
echo "Fatal error Can't create database directory '$dir'"
link_to_help
exit 1
fi
chmod 700 "$dir"
fi
if test -n "$user"
then
chown $user "$dir"
if test $? -ne 0
then
echo "Cannot change ownership of the database directories to the '$user'"
echo "user. Check that you have the necessary permissions and try again."
exit 1
fi
fi
done
if test -n "$user"
then
args="$args --user=$user"
fi
# When doing a "cross bootstrap" install, no reference to the current
# host should be added to the system tables. So we filter out any
# lines which contain the current host name.
if test $cross_bootstrap -eq 1
then
filter_cmd_line="sed -e '/@current_hostname/d'"
else
filter_cmd_line="cat"
fi
# Configure mysqld command line
mysqld_bootstrap="${MYSQLD_BOOTSTRAP-$mysqld}"
mysqld_install_cmd_line()
{
"$mysqld_bootstrap" $defaults "$mysqld_opt" --bootstrap \
"--basedir=$basedir" "--datadir=$ldata" --log-warnings=0 --loose-skip-innodb \
--loose-skip-ndbcluster $args --max_allowed_packet=8M \
--default-storage-engine=myisam \
--net_buffer_length=16K
}
# Create the system and help tables by passing them to "mysqld --bootstrap"
s_echo "Installing MariaDB/MySQL system tables in '$ldata' ..."
if { echo "use mysql;"; cat "$create_system_tables" "$create_system_tables2" "$fill_system_tables"; } | eval "$filter_cmd_line" | mysqld_install_cmd_line > /dev/null
then
s_echo "OK"
else
echo
echo "Installation of system tables failed! Examine the logs in"
echo "$ldata for more information."
echo
echo "The problem could be conflicting information in an external"
echo "my.cnf files. You can ignore these by doing:"
echo
echo " shell> $scriptdir/scripts/mysql_install_db --defaults-file=~/.my.cnf"
echo
echo "You can also try to start the mysqld daemon with:"
echo
echo " shell> $mysqld --skip-grant --general-log &"
echo
echo "and use the command line tool $bindir/mysql"
echo "to connect to the mysql database and look at the grant tables:"
echo
echo " shell> $bindir/mysql -u root mysql"
echo " mysql> show tables;"
echo
echo "Try 'mysqld --help' if you have problems with paths. Using"
echo "--general-log gives you a log in $ldata that may be helpful."
link_to_help
echo "MariaDB is hosted on launchpad; You can find the latest source and"
echo "email lists at http://launchpad.net/maria"
echo
echo "Please check all of the above before submitting a bug report"
echo "at http://mariadb.org/jira"
echo
exit 1
fi
s_echo "Filling help tables..."
if { echo "use mysql;"; cat "$fill_help_tables"; } | mysqld_install_cmd_line > /dev/null
then
s_echo "OK"
else
echo
echo "WARNING: HELP FILES ARE NOT COMPLETELY INSTALLED!"
echo "The \"HELP\" command might not work properly."
fi
# Don't output verbose information if running inside bootstrap or using
# --srcdir for testing. In such cases, there's no end user looking at
# the screen.
if test "$cross_bootstrap" -eq 0 && test -z "$srcdir"
then
s_echo
s_echo "To start mysqld at boot time you have to copy"
s_echo "support-files/mysql.server to the right place for your system"
echo
echo "PLEASE REMEMBER TO SET A PASSWORD FOR THE MariaDB root USER !"
echo "To do so, start the server, then issue the following commands:"
echo
echo "'$bindir/mysqladmin' -u root password 'new-password'"
echo "'$bindir/mysqladmin' -u root -h $hostname password 'new-password'"
echo
echo "Alternatively you can run:"
echo "'$bindir/mysql_secure_installation'"
echo
echo "which will also give you the option of removing the test"
echo "databases and anonymous user created by default. This is"
echo "strongly recommended for production servers."
echo
echo "See the MariaDB Knowledgebase at http://mariadb.com/kb or the"
echo "MySQL manual for more instructions."
if test "$in_rpm" -eq 0
then
echo
echo "You can start the MariaDB daemon with:"
echo "cd '$basedir' ; $bindir/mysqld_safe --datadir='$ldata'"
echo
echo "You can test the MariaDB daemon with mysql-test-run.pl"
echo "cd '$basedir/mysql-test' ; perl mysql-test-run.pl"
fi
echo
echo "Please report any problems at http://mariadb.org/jira"
echo
echo "The latest information about MariaDB is available at http://mariadb.org/."
echo "You can find additional information about the MySQL part at:"
echo "http://dev.mysql.com"
echo "Support MariaDB development by buying support/new features from MariaDB"
echo "Corporation Ab. You can contact us about this at sales@mariadb.com."
echo "Alternatively consider joining our community based development effort:"
echo "http://mariadb.com/kb/en/contributing-to-the-mariadb-project/"
echo
fi
exit 0
권한 설정
[root@CentOS7 ~]# chmod +x /usr/libexec/mariadb-wait-ready
[root@CentOS7 ~]# chmod +x /usr/libexec/mariadb-prepare-db-dir
[root@CentOS7 ~]# chmod +x /usr/libexec/mysql_install_db
my.cnf 파일 설정
[root@CentOS7 ~]# vi /etc/my.cnf
[mysqld]
#datadir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock
datadir=/usr/local/mysql/data
lc_messages_dir = /usr/local/mysql/share
[mysqld_safe]
log-error=/var/log/mariadb/mariadb.log
#pid-file=/var/run/mariadb/mariadb.pid
pid-file=/var/lib/mysql/mariadb.pid
mysql log디렉토리 생성 및 socket 디렉토리 생성
[root@CentOS7 ~]# mkdir -p /var/lib/mysql
[root@CentOS7 ~]# chown mysql:mysql /var/lib/mysql
[root@CentOS7 ~]# mkdir /var/log/mariadb
[root@CentOS7 ~]# chown mysql:mysql /var/log/mariadb
[root@CentOS7 ~]# export MYSQL_UNIX_PORT=/var/lib/mysql/mysql.sock
Systemd daemon-reload 및 실행
[root@CentOS7 ~]# systemctl daemon-reload
[root@CentOS7 ~]# systemctl start mariadb
[root@CentOS7 ~]# systemctl enable mariadb
mysql_secure_installation
[root@CentOS7 ~]# vi .bash_profile
PATH=$PATH:$HOME/bin
PATH=$PATH:$HOME/bin:/usr/local/mysql/bin
export PATH
export MYSQL_UNIX_PORT=/var/lib/mysql/mysql.sock
[root@CentOS7 ~]# source .bash_profile
[root@CentOS7 ~]# mysql_secure_installation
NOTE: RUNNING ALL PARTS OF THIS SCRIPT IS RECOMMENDED FOR ALL MariaDB
SERVERS IN PRODUCTION USE! PLEASE READ EACH STEP CAREFULLY!
In order to log into MariaDB to secure it, we'll need the current
password for the root user. If you've just installed MariaDB, and
you haven't set the root password yet, the password will be blank,
so you should just press enter here.
Enter current password for root (enter for none):
OK, successfully used password, moving on...
Setting the root password ensures that nobody can log into the MariaDB
root user without the proper authorisation.
Set root password? [Y/n] y
New password:
Re-enter new password:
Password updated successfully!
Reloading privilege tables..
... Success!
By default, a MariaDB installation has an anonymous user, allowing anyone
to log into MariaDB without having to have a user account created for
them. This is intended only for testing, and to make the installation
go a bit smoother. You should remove them before moving into a
production environment.
Remove anonymous users? [Y/n] y
... Success!
Normally, root should only be allowed to connect from 'localhost'. This
ensures that someone cannot guess at the root password from the network.
Disallow root login remotely? [Y/n] y
... Success!
By default, MariaDB comes with a database named 'test' that anyone can
access. This is also intended only for testing, and should be removed
before moving into a production environment.
Remove test database and access to it? [Y/n] y
- Dropping test database...
... Success!
- Removing privileges on test database...
... Success!
Reloading the privilege tables will ensure that all changes made so far
will take effect immediately.
Reload privilege tables now? [Y/n] y
... Success!
Cleaning up...
All done! If you've completed all of the above steps, your MariaDB
installation should now be secure.
Thanks for using MariaDB!
[root@CentOS7 ~]#
Mariadb Status
[root@CentOS7 ~]# mysql -uroot -p
Enter password:
Welcome to the MariaDB monitor. Commands end with ; or \g.
Your MariaDB connection id is 17
Server version: 10.3.8-MariaDB Source distribution
Copyright (c) 2000, 2018, Oracle, MariaDB Corporation Ab and others.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
MariaDB [(none)]> status;
--------------
mysql Ver 15.1 Distrib 10.3.8-MariaDB, for Linux (x86_64) using readline 5.1
Connection id: 17
Current database:
Current user: root@localhost
SSL: Not in use
Current pager: stdout
Using outfile: ''
Using delimiter: ;
Server: MariaDB
Server version: 10.3.8-MariaDB Source distribution
Protocol version: 10
Connection: Localhost via UNIX socket
Server characterset: utf8
Db characterset: utf8
Client characterset: utf8
Conn. characterset: utf8
UNIX socket: /var/lib/mysql/mysql.sock
Uptime: 2 min 0 sec
Threads: 7 Questions: 20 Slow queries: 0 Opens: 18 Flush tables: 1 Open tables: 12 Queries per second avg: 0.166
--------------
MariaDB [(none)]> quit;
Bye
[root@CentOS7 ~]#
mariadb 실행 확인
[root@CentOS7 ~]# systemctl status mariadb
● mariadb.service - MariaDB database server
Loaded: loaded (/usr/lib/systemd/system/mariadb.service; enabled; vendor preset: disabled)
Active: active (running) since Sat 2018-12-01 03:43:37 KST; 8s ago
Process: 2028 ExecStartPost=/usr/libexec/mariadb-wait-ready $MAINPID (code=exited, status=0/SUCCESS)
Process: 2002 ExecStartPre=/usr/libexec/mariadb-prepare-db-dir %n (code=exited, status=0/SUCCESS)
Main PID: 2027 (mysqld_safe)
CGroup: /system.slice/mariadb.service
├─2027 /bin/sh /usr/local/mysql/bin/mysqld_safe --basedir=/usr
└─2125 /usr/local/mysql/bin/mysqld --basedir=/usr --datadir=/usr/local/mysql/data --plugin-dir=/usr/lib64/mysql/plugin --log-error=/var/log/mariadb/mariadb.log --pid-file=/var/lib/mysql/mariadb.pid --socket=/var/lib/mysql/mysql.sock
Dec 01 03:43:36 CentOS7 systemd[1]: Starting MariaDB database server...
Dec 01 03:43:36 CentOS7 mysqld_safe[2027]: 181201 03:43:36 mysqld_safe Logging to '/var/log/mariadb/mariadb.log'.
Dec 01 03:43:36 CentOS7 mysqld_safe[2027]: 181201 03:43:36 mysqld_safe Starting mysqld daemon with databases from /usr/local/mysql/data
Dec 01 03:43:37 CentOS7 systemd[1]: Started MariaDB database server.
[root@CentOS7 ~]#
php 7.2 사용시 필요한 설정
[root@CentOS7 ~]# mv /usr/local/mysql/include /usr/local/mysql/include.def
[root@CentOS7 ~]# mkdir -p /usr/local/mysql/include/mysql
[root@CentOS7 ~]# chown -R mysql:mysql /usr/local/mysql/include
[root@CentOS7 ~]# cd /usr/local/src/mariadb-10.3.8/include
[root@CentOS7 include]# cp -rf ./* /usr/local/mysql/include/mysql
php7.2 설치
php-7.2.12.tar 파일 다운로드
[root@CentOS7 ~]# cd /usr/local/src/
[root@CentOS7 src]# wget --trust-server-names http://jp2.php.net/get/php-7.2.12.tar.xz/from/this/mirror
[root@CentOS7 src]# tar xvf php-7.2.12.tar.xz
[root@CentOS7 src]# cd php-7.2.12/
php-7.2 설치
[root@CentOS7 php-7.2.12]# ./configure --prefix=/usr/local/php \
--with-config-file-path=/etc \
--with-apxs2=/usr/local/apache2/bin/apxs \
--with-config-file-scan-dir=/etc/php/php.d --with-zlib-dir --enable-mbstring --with-curl \
--with-zlib --disable-rpath --enable-inline-optimization --enable-sockets \
--with-mysqli --with-openssl --with-fpm-user=nobody --with-fpm-group=nobody \
--with-mysql-sock=/var/lib/mysql/mysql.sock \
--with-pdo-mysql --enable-zip
[root@CentOS7 php-7.2.12]# make && make install
httpd.conf 파일
[root@CentOS7 ~]# vi /usr/local/apache2/conf/httpd.conf
AddType application/x-httpd-php .php .phtml
AddType application/x-httpd-php-source .phps
DirectoryIndex index.php index.html
[root@CentOS7 ~]# systemctl restart httpd
phpinfo
[root@CentOS7 ~]# vi /usr/local/apache2/htdocs/test.php
<?php phpinfo(); ?>
댓글을 달려면 로그인해야 합니다.